E-link China Technology Co.,Ltd.
Professional Fiber Optical Communication and CCTV Security Transmission Product Manufacturer
Payment & Shipping Terms:
|Model:||LNK-SPD2400G||Continuous Operating Voltage:||5V|
|Maximum Working Voltage:||6V||Insulation Resistance:||≥0.4MΩ|
|Insertion Loss:||≤0.2dB||Transmission Rate:||10/100/1000Mbps|
|Protection Pins:||1, 2, 3, 6||Protection Lines:||24Channel|
power over ethernet gigabit switch,
poe powered gigabit switch
This product is applicable to the lightning and electric surge protection of the Ethernet signal circuit, control wiring and power circuit of monitor camera.
It can combine the above mentioned lightning protection function into one. Its housing adopts integrated iron structure with small volume and ultra low residual pressure output.
Design of this product considers fully that the electrode capacitance and distributed capacitance would lessen data signaling with small insertion loss, which can satisfy the requirement of video signal transmission, and can response to the transient overvoltage quickly.
|Ethernet||Continuous Operating Voltage||5V|
|Maximum Working Voltage||6V|
|Nominal Discharging Current In (8/20us)||2KA|
|Maximum Discharging Current Max (8/20us)||3KA|
|Limit Voltage Up||1~2||＜20V|
|Protection Pins||1, 2, 3, 6|
|Protection lines||24 Channels|
|Relative Humidity||5% to 95% non-condensing|
220VAC Control Line, RJ45 port;
Multi-level protection circuit, residual depression;
Four wire protection: 126.96.36.199 line
High transmission band, fast response, low insertion loss;
Exquisite appearance, small size, easy to stall;
Ground through a special process to avoid signal interference.
It has huge flow capacity, sensitive reaction
Excellent performance, and low-loss insert
Contact Person: Tony Wang