E-link China Technology Co.,Ltd.
Professional Fiber Optical Communication and CCTV Security Transmission Product Manufacturer
Product Details:
Payment & Shipping Terms:
|
Dimensions (W X D X H): | 71 X 94 X 26 Mm | Weight: | 200g |
---|---|---|---|
Power Requirements: | AC 100-240V 50/60Hz 0.15A Max | Power Consumption: | <3W |
100/1000M Auto-sensation: | Support | Storage Temperature: | -10~70 Degrees C |
Operating Temperature: | 0~50 Degrees C | Regulation Compliance: | CE, RoHS And FCC |
Highlight: | fiber optic ethernet media converter,gigabit ethernet media converter |
10/100/1000 BASE-T to 100/1000 BASE-X SFP Media Converter Fiber To Ethernet Built in Power Supply
Overview
LNK-3012-SFP is equipped with one 10/100/1000BASE-T RJ45 copper and one 100/1000BASE-X SFP fiber optic interface with built-in power supply. The media converter fulfills 100/1000M auto-sensation at fiber optic port, which increase the flexibility of the whole network. The SFP slot of the LNK-3012-SFP is compatible with 100BASE-FX and 1000BASE-SX / LX / WDM through SFP fiber-optic transceivers.
Customer can easily migrate from 100M fiber to Gigabit without changing customer premise equipment (CPE). Start using the LNK-3012-SFP in your current 100M infrastructure. When you are ready to move to Gigabit Ethernet, only change the central switch and all the LNK-3012-SFP will automatically adjust to Gigabit speed. This cuts the number of customer visits in half and reduce installation cost with 50%. No need for proprietary equipment, it is compatible with you existing Ethernet products and follows all the accepted standards.
Features
· 1-port 10/100/1000BASE-T RJ45 with auto MDI / MDI-X function
· 1 SFP interface, 100/1000BASE-X dual mode (auto detection)
· IEEE 802.3 / 802.3u / 802.3ab / 802.3z Ethernet standard compliant
· Supports auto-negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode
· Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
· 9K jumbo frame size support
· LFP function support
· Supporting low-time lag transmission
· Built-in Power Supply
· Extremely low power consumption (less than 3W), reliable and stable performance
Technical Indexes
Hardware Specifications | |
Copper Interface | 1 x 10/100/1000BASE-T RJ45 TP |
Auto-MDI/MDI-X, auto-negotiation | |
Fiber Optic Interface | 1 x 1000BASE-SX/LX/BX SFP interface. |
Compatible with 100BASE-FX SFP | |
Connector | Removable 6-pin terminal block |
Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2 | |
Alarm | Provides one relay output for power failure |
Alarm relay current carry ability: 1A @ DC 24V | |
LED | ■ TP: 10M |
■ TP: 100M | |
■ TP: 1000M | |
■ FX: 100M | |
■ FX: 1000M | |
■ PWR | |
Dimensions (W x D x H) | 71 x 94 x 26 mm |
Weight | 200g |
Power Requirements | AC 100-240V 50/60Hz 0.15A Max |
Power Consumption / Dissipation | <3W |
Network Cables | 10/100/1000BASE-T: |
Cat3, 4, 5, 5e, 6 UTP cable (100 meters, max.) | |
EIA/TIA-568 100-ohm STP (100 meters, max.) | |
1000BASE-SX: | |
50/125μm or 62.5/125μm multi-mode fiber optic cable, up to 550m (varying on SFP module) | |
1000BASE-LX: | |
9/125μm single-mode fiber optic cable, up to 10/20/30/40/50/60/70/120 kilometers (varying on SFP module) | |
100BASE-FX: | |
50/125μm or 62.5/125μm multi-mode fiber optic cable, up to | |
2 kilometers (varying on SFP module) | |
9/125μm single-mode fiber optic cable, up to 20/40/60 kilometers (varying on SFP module) | |
Standards Conformance | |
Standards Compliance | IEEE 802.3 10Base-T |
IEEE 802.3u 100Base-TX | |
IEEE 802.3ab 1000Base-T | |
IEEE 802.3z 1000Base-SX/LX | |
Regulation Compliance | CE, RoHS and FCC |
Environment | |
Temperature | Operating: 0~50 degrees C |
Storage: -10~70 degrees C | |
Humidity | Operating: 5~95% (non-condensing) |
Storage: 5~95% (non-condensing) |
*Specifications subject to change without notice.
Contact Person: Mr. Michael Guo
Tel: 19928768315
Fax: 86-755-8312-8674
E-Link Gigabit Power Over Ethernet Injector 12~48VDC Power Input DIN Rail / Wall Mount
Single Port 60W Power Over Ethernet Devices Support Din Rail / Wall Mount Installation
10/100/1000Mbps High Power Poe Injector 95 Watt 802.3bt 100m Transmission
48 Volt 2 Port Cisco POE Power Over Ethernet Injector 10 / 100 / 1000Mbps 15.4W
Mini 4K HDMI Optical Extender Uncompressed Multimode USB Input 300M
4K SFP LC 80km HDMI Fiber Extender 10.3Gbps Single Mode Fiber Extender
SFP 5VDC HDMI Over Fiber Optic Extender Micro 4K USB Port 80Km
4K*2K HDCP 10.3Gbps HDMI Fiber Extender SFP LC With External Audio
Mini 3G/HD-SDI to Fiber Converter Extender with Tally function or RS485 Data
3G-SDI SDI To Fiber Optic Converter Video Extender over Fiber 20KM Long Transmission
HD SDI To Fiber Optic Converter with Forward Audio
Ethernet over Fiber Converter SD/HD/3G-SDI + RS485/RS422/RS232 Data + 10/100M
| Sitemap