E-link China Technology Co.,Ltd.
Professional Fiber Optical Communication and CCTV Security Transmission Product Manufacturer
Payment & Shipping Terms:
|SMPTE Standard:||425M Level A & B, 424M, 292M, 259M-C||SDI Transmission Rates:||2.970 Gbit/s And 2.970/1.001 Gbit/s|
|CVBS Output Resolution:||PAL/NTSC-M||Input Port:||1 X BNC (SD/HD/3G-SDI)|
|Output Port:||1 X BNC (SD/HD/3G-SDI), 3 X RCA (CVBS,L/R)||Power Supply:||DC 5V -12V|
|Dimension:||95mm X 60mm X 25 Mm||Weight:||260g|
1-port BNC (SD/HD/3G-SDI) + 3-port CVBS 3G-SDI to AV Scaler Converter
The LNK-SA001 SDI to AV scaler converter allows SD-SDI, HD-SDI and 3G-SDI signals to be shown on CRT or HDTV while ensuring high bit rates of 2.970 Gbit/s to give you fast signal transmission without any loss. For professionals this means that it is now easier to distribute and extend your 3G SDI signal while giving you the ability to display your work on TV thanks to the built in this converter. Furthermore, thanks to the loop-through 3G-SDI design, users are able to enjoy both SDI and AV at the same time.
Note: Cable tested with Belden 1694A. Operating distances may vary if used with another type of cable.
|SMPTE Standard||425M Level A & B, 424M, 292M, 259M-C|
|SDI Transmission Rates||2.970 Gbit/s and 2.970/1.001 Gbit/s|
|SDI in/out Resolution||
SD: 480i@60, 576i@50
|CVBS Output Resolution||PAL/NTSC-M|
|Input Port||1 x BNC (SD/HD/3G-SDI)|
|Output Port||1 x BNC (SD/HD/3G-SDI), 3 x RCA (CVBS,L/R)|
|Power Supply||DC 5V -12V|
|ESD Protection Human body model||
±8kV (air-gap discharge) ,
±4kV (contact discharge)
|Dimension||95mm x 60mm x 25 mm|
|Operating Temperature||0°C ~ 40°C / 32°F ~ 104°F|
|Storage Temperature||-20°C ~ 60°C / -4°F ~ 140°F|
|elative Humidity||20 ~ 90% RH (Non-condensing)|
|Power Consumption (Max)||5W|
VI: Operation Controls and Functions
Front Panel Rear Panel
(1) SDI IN: This slot is where you connect the SDI source output for SDI signal sending to be display on screen.
(2) Power LED: This red LED will switch on when the device is connected with the power supply.
(3) POWER LED: This red LED will illuminate when the device is connected with power supply.
(4)DC IN: Plug the 5V-12V DC power supply into the unit and connect the adaptor to AC wall outlet.
(5)CVBS out format: Press this switch to select the CVBS output format .
(6)AV output: This slot is where you connect the TV with RCA calbe
Contact Person: Anna Chen