E-link China Technology Co.,Ltd.
Professional Fiber Optical Communication and CCTV Security Transmission Product Manufacturer
Payment & Shipping Terms:
|The Number/type:||2-way Fiber Or 1-way Fiber||Connectors:||2 LC Connectors|
|Working Distance:||10-60km||Data Rate:||10G|
|Single Mode:||- 5 DBM, Typical||Multimode:||- 12 DBM, Typical|
1-Ch HDMI 1080P Video + 1-Ch RS232 Data HDMI Over Fiber Optic Extender
This product is a broadcast level high-definition HDMI optical transceiver, converting HDMI signal into 10G difference signal through the patent conversion chip. The optical module and optical fiber are used to send and receive, which realized remote transmission of HDMI multimedia signal. Through light module of different transmission distance, it realized the long distance transmission as far as 60 km. This transmission product has no loss, no transmission delay and can meet various requirements of HD long distance transmission. It supports HDMI 1.4 HD and 3D video signal transmission. The EDID can be reversed and it supports HDCP. The resolution can respectively up to 720 p / 60 Hz, 1080 I / 60 Hz, 1080 p /30 Hz, 1080 p / 60 Hz, 1080 p / 120 Hz and it supports 7.1 -channel PCM surround sound and audio compression. It is compatible with DVI signal transmission, supports hot plugging of HDMI interface and with low energy consumption and long distance. It has no compression, zero delay, plug and play and the compatibility is strong, so it can achieve a more accurate display. 850 nm multimode and 1310 nm single-mode fiber model are provided.
HDMI optical transceiver is a combination of transmitter and receiver, which realized the perfect transmission from pixel to pixel of HDMI video image. The product is compact and its small shell allows it can be concealed behind the flat panel display.
HDMI optical transceiver is part of the large, complete system of optical fiber transmission products. It and other DVI, VGA optical transceiver forms a series of high definition video signal extender. It can realize various options of point-to-point transmission. The transmission mode of one sender with more than one receiver can be achieved by optical divider.
HDMI optical transceiver is very suitable for the wide application environment of transporting content with the highest quality, long distance transportation and high resolution. Due to the inherent safety and the anti-jamming of optical fiber transmission, optical fiber application is more suitable for government, army and medical environment. The HDMI optical transceiver applied the LC type connectors, which is industrial standard.
without RS232 transmission function. Height: 3U
with RS232 transmission function Second, product name: HDMI optical transceiver Third, product model: optical transmitter: LNK-109– T Optical receiver: LNK-109– R . LNK-109- T is optical transmitter and LNK-109- R is optical receiver. The combination of these two devices, which can realize that the LNK-109- T optical transmitter can sends HDMI audio and video signal to LNK-109- R optical receiver by the long distance cable. Without any compression processing, the audio and video signal can be output with their high "original" fidelity.
LNK-109- T/R optical transceiver is fully compatible with DVI interface signals. Connecting the HDMI to DVI cable or connector can realize the DVI signal transmission.
1, HDMI optical transmitter
A, power supply - power supplied with DC 5-12 v / 1 A
B, HDMI In - HDMI signal input interface
C, Power - the Power indicator light, bright when Power supply is normal
D, Ray – bright when no light input
G, Fault -- bright when light module malfunction
F, RS232 - used for serial data transmission
2, HDMI optical receiver:
A, power supply - power supplied with DC 5-12 v / 1 A.
B, HDMI Out - HDMI signal output interface
D, Power - the Power indicator light, bright when Power supply is normal
E, Ray - bright when no light input
F, Fault -- bright when light module malfunction
G, RS232 - used for serial data transmission
1, Connect the HDMI transmitter and display through a HDMI cable and the TV set was on
2, Connect the HDMI transmitter with power
3, Hold down the button on the transmitter for 2 seconds
4, The Fault light on the panel light is shining
5, the study is done after 5 seconds when the Fault light is not bright
6, Disconnect the HDMI transmitter power
When using one-core optical fiber to transmit signal, RS232 serial port data is one-way data, when it can be transmitted from the sender to the receiver but can't return the serial data.
When using two-core optical fiber to transmit signal, RS232 serial port data is two-way data.
2 - Data reception
3 - Data sending
5 - Grounding
This product can use one-core optical fiber or two-core multimode or single-mode optical fiber to transmit high-definition HDMI signal. The interface type is LC and optical module is SFP + light module.
One-core fiber instruction: if the customer uses one-core optical fiber, there is no EDID signal return. The sender inherent standard EDID can be used or EDID study button can be used to study.
Two-core fiber instruction: the two-core optical fiber can be used to return the EDID parameters of display in real time.
Seven, regular order type:
|Optical module||Optical fiber selections||Transmission distance|
|LNK-109S-D||Single mode(two-fiber)||10 kilometers|
|LNK-109S-S||Single mode(one-fiber)||10 kilometers|
Optic fiber interconnection between the transmitter and receiver
The number/type: 2-way fiber or 1-way fiber
Connector: 2 LC connectors
Single mode: 10 km customization: 30 km, 60 km
Multimode: 300 m
Rated peak value wavelength: from 850 nm to 1310 nm
Data rate: 10 G
Single mode: - 5 DBM, typical
Multimode: - 5 DBM, typical
Largest receiver sensitivity
Single mode: - 18 DBM, typical
Multimode: - 12 DBM, typical
Note: The proper HDMI should be used to connect to DVI - D cable or adapter for DVI signal input and output.
Resolution range: highest for 1920 * 1200 or 1200 p @ 1080 Hz pixel to pixel format.
EDID: support the function of EDID return and EDID learning.
HDCP: conform to the requirements of the high bandwidth digital content protection.
Standard: DVI 1.0; HDMI 1.4; HDCP1.1
1-way single link HDMI
Connector: 1 type A HDMI socket
Balance: automatically to balance the 10 meters length cable
1-way single link HDMI
1 type A HDMI socket
Working temperature: - 25 ℃ ~ + 50 ℃
Storage temperature: - 40 ℃ ~ + 80 ℃
Relative humidity: 0 ~ 95% (non-condensate)
Eleven, appearance size (mm): 130 * 170 * 30 mm
Contact Person: Hubert Hu