E-link China Technology Co.,Ltd.
Professional Fiber Optical Communication and CCTV Security Transmission Product Manufacturer
|
Product Details:
Payment & Shipping Terms:
|
| Compliance: | DVI1.0 / HDMI V1.4 | Maximum Pixel Clock Frequency: | 340 MHz |
|---|---|---|---|
| Maximum Video Bit Rate: | 3.40 Gbps | Supported Color Depth: | 24-bit |
| Supported Resolutions: | 4096*2160/60P | Digital Audio Support: | 7.1 Channel LPCM, 192 KHz, 24-bit Audio Capability |
| DVI Input / DVI Output: | 1x DVI 24+1 Female Connector | Optical: | 1x SFP+ Port |
| KVM Support: | USB Keyboard X 1 / USB Mouse X1 | CEC Support: | CEC Are NOT Supported! |
| High Light: | dvi to fiber converter,dvi to fiber media converter |
||
10G SFP+ Port 5U Rack Card Type 4K 3840*2160/60P DVI Video to Fiber Converter
Technical Indexes (4K DVI KVM Fiber Extender)
|
Performance |
|
|
Compliance |
DVI1.0 / HDMI v1.4 |
|
Maximum Pixel Clock Frequency |
340 MHz |
|
Maximum Video Bit Rate |
3.40 Gbps |
|
Supported Color Depth |
24-bit |
|
Supported Resolutions |
1920x1080/60p,3840x2160/30p, 4096x2160/30p, 3840x2160/60p(YCbCr 420),4096*2160/60P(YCbCr 420) |
|
Digital Audio Support |
7.1 channel LPCM, 192 kHz, 24-bit audio capability |
|
Connections |
|
|
DVI Input / DVI Output |
1x DVI 24+1 Female connector |
|
Optical |
1x SFP+ port |
|
Cable |
|
|
Fiber Cable Type / Max. Length |
50/125μ OM3-300 Multi-Mode Fiber: ≤ 1,000 ft. (≤ 300 meters) |
|
Extended function |
|
|
KM Support |
USB Keyboard x 1 / USB Mouse x1 |
|
CEC Support |
CEC are NOT supported! |
|
DDC Support |
|
|
EDID Pass-through Support |
only 300 meters |
|
HDCP Pass-through Support |
only 300 meters |
|
Mechanical |
|
|
Construction |
High-impact Alufer enclosure |
|
Dimensions (L x W x H) |
89mm x 104 mm x 28.3 mm |
|
Net Weight |
LNK-4KDVI-2240-S: 200 g LNK-4KDVI-2240-R: 200 g |
|
Environmental |
|
|
Operating Temperature |
32° to +122° F. (0° to +50° C) |
|
Storage Temperature |
-40° to +185° F. (-40° to +85° C) |
|
Operating Humidity |
5% to 80% (non-condensing) |
|
Storage Humidity |
5% to 95% (non-condensing) |
|
Power Requirements |
|
|
External AC Power Adapter |
Input: 100-240VAC / 50-60Hz 0.2A |
|
Power Consumption |
LNK-4KDVI-2240-S: 3 watts LNK-4KDVI-2240-R: 3 watts |
|
Warranty |
|
|
Limited Warranty |
2 year warranty |
Technical Indexes (5U Rack)
| Parameter | Specifications |
| Number of slots | 16 |
| Structure | 5U rack |
| Power input | AC Voltage: AC 85~265V; frequency: 50/60 Hz |
| Power output | DC12V 20A (250W) |
| Ripple | ≤20 mv |
| Power configuration | dual power supply for warm backup mode |
| LED indication | POWER (power supply) |
| Size (WxHxD) | 482*221*300mm |
| Max power consumption | 250W |
| Operating temperature | -10~55ºC |
| Operating humidity | 5%~90% |
| Maintaining temperature | -40~70ºC |
| Maintaining humidity | 5% ~ 90% non-condensing |
Overview
DVI (High-Definition Multimedia Interface) recently has become increasingly popular in the application of video and audio transmission system. In view of the extreme of electrical performances, however, the traditional copper wire cable imposes limits on signal transmission distance and signal quality. In reality, optical fiber is of low dispersion, which in turn has the strength of longer signal transmission distance and better signal transmission quality in comparison to the traditional copper wire cable. DVI extender uses 2 cores fiber without any copper wire inside, where radio frequency interference phenomenon is literally ruled out, which shows the advantage of high performance and good signal quality as well as low cost.
High Performance — The LNK-4KDVI-2240 series is a high performance 4K DVI KVM Fiber Optic Extender that transmits high resolution DVI signals over extreme distances using 2 cores fiber. This extender supports HDMI v1.4 signals with resolutions up to 4K (4096x2160 / 30p) over cable distances up to 300m.
Fiber Optic Extension — The extender set consists of an optical transmitter module that converts the DVI signals into light pulses for transmission over a 2 cores fiber. An optical receiver module converts the light pulses back to a DVI signal for display on a monitor or projector.
Cutting-Edge Optics — Most single-fiber optical extenders transmit signals over multiple optical wavelengths, which can suffer from chromatic dispersion over long cable runs. To avoid this issue, this extender employs a cutting-edge, high-speed SerDes that combines the DVI signal channels into a single uncompressed 10.3 Gbps bit stream. This enables the optical transmission of the signal over a single optical wavelength, which provides increased signal fidelity, stability and flawless image quality, regardless of cable length. These features make the LNK-4KDVI-2240 series the ideal future-proof choice for systems designers and integrators who need to transmit high resolution DVI signals over extreme distances.
Features
Application
Ordering Information
| Item | Description | |
| LNK-4KDVI-2240 | Card Type 4K DVI KVM Fiber Optic Extender with KVM, including 1 sender & 1 receiver, used by pairs | |
| LNK-5U-DVI | 16-slot 5U Rack for 4K DVI KVM Fiber Extender |
Contact Person: Mr. Michael Guo
Tel: 19928768315
Fax: 86-755-8312-8674
E-Link Gigabit Power Over Ethernet Injector 12~48VDC Power Input DIN Rail / Wall Mount
Single Port 60W Power Over Ethernet Devices Support Din Rail / Wall Mount Installation
10/100/1000Mbps High Power Poe Injector 95 Watt 802.3bt 100m Transmission
48 Volt 2 Port Cisco POE Power Over Ethernet Injector 10 / 100 / 1000Mbps 15.4W
Mini 4K HDMI Optical Extender Uncompressed Multimode USB Input 300M
4K SFP LC 80km HDMI Fiber Extender 10.3Gbps Single Mode Fiber Extender
SFP 5VDC HDMI Over Fiber Optic Extender Micro 4K USB Port 80Km
4K*2K HDCP 10.3Gbps HDMI Fiber Extender SFP LC With External Audio
Mini 3G/HD-SDI to Fiber Converter Extender with Tally function or RS485 Data
3G-SDI SDI To Fiber Optic Converter Video Extender over Fiber 20KM Long Transmission
HD SDI To Fiber Optic Converter with Forward Audio
Ethernet over Fiber Converter SD/HD/3G-SDI + RS485/RS422/RS232 Data + 10/100M
| Sitemap
