Fast Speed 8 Port Gigabit Ethernet POE Switch For IP Cameras 25.5W SFP Fiber Port

Overview

The 8 port 10/100Mbps desktop PoE switch with 1 gigabit Combo uplink port (LNK-1082T Series) with 150W internal power, provides an easier installation way for your PoE devices (IP cameras,VoIP,wireless AP,etc.).And it can detect your PoE devices according to PoE standard.So the users do not need to worry about the PoE switch will damage their PoE devices.The max transmission distance is 100 meters with Cat5 cables.Ideally,shorter cable would reduce the power degradation over the cables; with high quality cables also can reduce power loss.Plug & play design make the installation quite easy,users do not need any configuration,which make this PoE switch a very good choice for IP cameras,wireless AP,VoIP users.

Features

• Support 24pcs RJ45 fast Ethernet ports and 2pcs fiber ports (SC or ST)
• IEEE 802.3at Power over Ethernet PoE compliant
• Supports 10/100Mbps fast Ethernet
• 8 x 100Mbps PoE port with 1G combo uplink
• Provides up to 30 watts for single PoE port
• 3.6Gbps bandwidth
• Forwarding rate: 100 Mbps / 148,800 pps; 10 Mbps / 14,880 pps
• Status LEDs: System Power, PoE, 100 Mbps, and Link / Activity
• Full wire-speed non-blocking reception and transmission
• Store-and-forward switching method
• Back pressure Flow Control for Half-Duplex mode
• IEEE 802.3x Flow Control for Full-Duplex mode
• Plug and Play
• Sturdy rack mountable metal case
• Easy installation and use , no need to convert by software and network protocol
• 1-year limited warranty

Warranty: One Year

Technical Indexes