E-link China Technology Co.,Ltd.
Professional Fiber Optical Communication and CCTV Security Transmission Product Manufacturer
Product Details:
Payment & Shipping Terms:
|
Interface Type: | BNC | Signal System: | PAL/NTSC/SECAM |
---|---|---|---|
Video Bandwidth Per Channel: | 6.5MHz | Sampling Frequency: | 15MHz |
Bandwidth Per Channel:: | 20Hz~20KHz | Input Impedance: | 47KΩ |
Highlight: | hd tvi converter,cctv camera video converter |
1-Ch video + 1-Ch Forward Audio + 1-Ch 10/100M Ethernet CCTV Fiber Optic Converter
Product Characteristic
■8 bit video signal digital sampling
■High-speed synchronous digital transmission technology
■Modular structure design(audio card and data card for optional configuration)
■Super optical dynamic range, no adjustment needed
■Status indication for power supply, optical signal and video
■No electromagnetic interference, radio frequency interference and ground current
■Safe transmission guaranteed under poor electromagnetic environment
■BNC video connector
■FC optical connector
■Video DC recovery
■Maximum tolerable link loss for single mode single fiber is 17db
Technical Index
Video interface | Interface type | BNC |
Signal system | PAL/NTSC/SECAM | |
Nominal input and output level | 1V p-p | |
Nominal input and output impedance: | 75Ω | |
Video bandwidth per channel | 6.5MHz | |
Sampling frequency: | 15MHz | |
Differential gain: | <1.3% | |
Differential phase: | <1.3° | |
Signal-to- noise ratio | >63dB | |
Audio interface | Bandwidth per channel: | 20Hz~20KHz |
Sampling frequency: | 48KHz | |
Quantization grade: | 24bit | |
Input impedance | 47KΩ | |
Output impedance | 10KΩ | |
Nominal input output level | 2V p-p | |
Signal -to-noise ratio | 75dB | |
Total harmonic distortion | 0.1% | |
Asynchronous data | Interface type | RS-485/422/Manchester/RS-232 |
Operational mode | Full-duplex/half-duplex | |
Communication speed | 300~9600Kbps | |
Bit error rate | <1*10-9 | |
Ethernet | Number of channel | 1 |
Standard |
ANSI X3T12TP-PMD IEEE 802.3/802.3u |
|
Protocol |
IEEE 802.1q VLAN IEEE 802.3x full duplex flow control and Back-Pressure half-duplex flow control |
|
Operational mode | 10/100M,full duplex/half duplex self-adaptation | |
Throughput rate: | 100%@100M | |
Packet loss rate: | 0 | |
Connector: | Video connector: | BNC socket |
Audio connector: | Pressure connector | |
Data connector: | Pressure connector | |
Ethernet connector | RJ-45 | |
Optical flexible connector | FC/PC | |
POWER | DC | +5V 2A / +9V 2A |
Power consumption | <15W(single end) | |
Environmental condition: | Operating temperature | -25℃~+70℃ |
Storage temperature | -40℃~+80℃ | |
Relative humidity | 0~95%(non condensable) |
Contact Person: Mr. Michael Guo
Tel: 19928768315
Fax: 86-755-8312-8674
E-Link Gigabit Power Over Ethernet Injector 12~48VDC Power Input DIN Rail / Wall Mount
Single Port 60W Power Over Ethernet Devices Support Din Rail / Wall Mount Installation
10/100/1000Mbps High Power Poe Injector 95 Watt 802.3bt 100m Transmission
48 Volt 2 Port Cisco POE Power Over Ethernet Injector 10 / 100 / 1000Mbps 15.4W
Mini 4K HDMI Optical Extender Uncompressed Multimode USB Input 300M
4K SFP LC 80km HDMI Fiber Extender 10.3Gbps Single Mode Fiber Extender
SFP 5VDC HDMI Over Fiber Optic Extender Micro 4K USB Port 80Km
4K*2K HDCP 10.3Gbps HDMI Fiber Extender SFP LC With External Audio
Mini 3G/HD-SDI to Fiber Converter Extender with Tally function or RS485 Data
3G-SDI SDI To Fiber Optic Converter Video Extender over Fiber 20KM Long Transmission
HD SDI To Fiber Optic Converter with Forward Audio
Ethernet over Fiber Converter SD/HD/3G-SDI + RS485/RS422/RS232 Data + 10/100M
| Sitemap