E-link China Technology Co.,Ltd.
Professional Fiber Optical Communication and CCTV Security Transmission Product Manufacturer
|
Product Details:
Payment & Shipping Terms:
|
Standards: | DVI V1.0, HDMI V1.4, HDCP V1.4 | Resolution: | 4K: 3840x2160 /30p (4:4:4), 3840x2160 /60p (4:2:0) |
---|---|---|---|
Wavelength: | 1310 Nm And 1550 Nm | Data Rate: | 10.3 Gbps |
Connector: | Double LC Receptacle | Transmission Distance: | Single Mode/Multi Mode, (300M) |
Weight: | 26g | ||
High Light: | 10.3 Gbps Fiber Optic Hdmi Extender,4K Fiber Optic Cable Extender |
Mini 4K HDMI Optical Transceiver support SMF MMF
Overview
Unsurpassed Performance — The LNK-106S is a high performance 4K Optical Extender that transmits high resolution HDMI signals over extreme distances using a single fiber optic cable. It supports HDMI v1.4 (HDCP compliant) signals with resolutions up to 3840x2160 /30p (4:4:4) and 3840x2160 /60p (4:2:0) over cable distances of up to 1,000 ft. (~ 300 m).
Fiber Optic Extension — The extender set consists of an optical transmitter module that converts the HDMI signals into light pulses for transmission over a single strand of Multi-Mode or Single-Mode optical fiber cable. An optical receiver module converts the light pulses back to an HDMI signal for display on a monitor or projector.
Multiple Signals Over One Cable — While the video component of the signal is one-way, the unit also simultaneously supports extension of bidirectional signals such as EDID and HDCP pass-through. The data rate from the TX to RX is 10.3 Gbps. using the 1310nm wavelength, while the reverse channel travels from RX to TX over 1550nm at 250 Mbps. The extender uses wavelength-division multiplexing (WDM) to enable both signals to travel over a single strand of optical fiber. This enables DDC communications without the need for additional cables. These features make the LNK-106S the ideal future-proof choice for systems designers and integrators who need to support high resolution HDMI / DVI signals with or without HDCP over extreme distances.
Features
Spefications
Performance | |
Standards Compliance | DVI v1.0, HDMI v1.4, HDCP v1.4 |
Maximum Pixel Clock Frequency | 340 MHz |
Maximum Video Bit Rate | 3.40 Gbps. / 10.3 Gbps. (Aggregate) |
Supported Color Depth | 12-bit |
Supported Resolutions | Up to 4K: 3840x2160 /30p (4:4:4), 3840x2160 /60p (4:2:0) |
Digital Audio Support | Embedded HDMI digital audio up to 8-channel (7.1) LPCM, 192 kHz, 24-bit audio capability |
Connections / Indicators | |
HDMI Input / HDMI Output | 1 ea. 19-pin Female HDMI connector |
Optical | 1 ea. LC fiber optic connector |
Power | 1 ea. USB Micro-B female connector |
Diagnostic LEDs | Power, Optical Link |
Optical | |
Optical Technology | 2x Discrete Optical Channels |
Optical Wavelengths / Data Rates | 1310 nm and 1550 nm / 10.3 Gbps |
Optical TX Unit | 1310nm FP laser diode and 1550nm PIN photo diode, Class 1 laser products |
Optical RX Unit | 1550nm FP laser diode and 1310nm PIN photo diode, Class 1 laser products |
Optical TX Output Power | 10.3 Gbps.: -6.0 dBm (minimum) / 0.0 dBm (maximum) |
Optical TX Extinction Ratio | 10.3 Gbps.: 3.5 dBm (minimum) / 7.0 dBm (maximum) |
Optical RX Input Sensitivity | 10.3 Gbps.: -14.5 dBm (minimum) |
Optical RX Max. Input Power | 10.3 Gbps.: 0 dBm (maximum) |
Optical Link Power Budget | 8.5 dB (minimum) |
HDCP Supported | |
Maximum Cable Length (typical) | 9/125μ Single-Mode Fiber: 1,000 ft. (~ 300 meters) 50/125μ OM4 Multi-Mode Fiber: 1,000 ft. (~ 300 meters) 50/125μ OM3 Multi-Mode Fiber: 1,000 ft. (~ 300 meters) |
DDC Support | |
EDID Support | EDID of connected display is transparent |
HDCP Support | Supports HDMI signals with or without HDCP encryption |
Mechanical | |
Case Dimensions (L x W x H) | 2.3" x 0.9" x 0.4" (59.4 mm x 22.3 mm x 10.9 mm) |
Weight | 0.92 oz. / 26 g (each unit) |
Construction | High-impact metal enclosure with black finish |
Environmental | |
Operating Temperature | +32° to +158° F (0° to +70° C) |
Storage Temperature | -40° to +185° F (-40° to +85° C) |
Operating Humidity | 5% to 80% (non-condensing) |
Storage Humidity | 5% to 95% (non-condensing) |
Power Requirements | |
Optical Transmitter / Receiver | The TX and RX units should be powered by the supplied external power adapters. The TX can be powered using an optional USB adapter cable (see below). |
External AC Power Adapters | Input: 100-240VAC / 50-60Hz 0.4A Output: 5VDC, 2.0A |
Maximum Power Consumption | TX Unit: 320mA (1.76 watts) RX Unit: 320mA (1.76 watts) |
Order Information
Model | Description | |
LNK-106S | Mini HDMI Optical Transceiver: supports resolutions up to 4K (UHD): 3840x2160 /30p (4:4:4), 3840x2160 /60p (4:2:0), Single Mode or OM3 Multi-mode Fiber, 300 meters, LC, including 1 transmitter & 1 receiver, used by pairs |
Contact Person: Mike
Tel: +8613686469576
E-Link Gigabit Power Over Ethernet Injector 12~48VDC Power Input DIN Rail / Wall Mount
Single Port 60W Power Over Ethernet Devices Support Din Rail / Wall Mount Installation
10/100/1000Mbps High Power Poe Injector 95 Watt 802.3bt 100m Transmission
48 Volt 2 Port Cisco POE Power Over Ethernet Injector 10 / 100 / 1000Mbps 15.4W
Mini 4K HDMI Optical Extender Uncompressed Multimode USB Input 300M
4K SFP LC 80km HDMI Fiber Extender 10.3Gbps Single Mode Fiber Extender
SFP 5VDC HDMI Over Fiber Optic Extender Micro 4K USB Port 80Km
4K*2K HDCP 10.3Gbps HDMI Fiber Extender SFP LC With External Audio
Mini 3G/HD-SDI to Fiber Converter Extender with Tally function or RS485 Data
3G-SDI SDI To Fiber Optic Converter Video Extender over Fiber 20KM Long Transmission
HD SDI To Fiber Optic Converter with Forward Audio
Ethernet over Fiber Converter SD/HD/3G-SDI + RS485/RS422/RS232 Data + 10/100M
| Sitemap