E-link China Technology Co.,Ltd.
Professional Fiber Optical Communication and CCTV Security Transmission Product Manufacturer
|
Product Details:
Payment & Shipping Terms:
|
| Model: | LNK-FS48G6C4X | Backplane Bandwidth: | 176Gbps |
|---|---|---|---|
| The Memory Capacity: | 128MB | Address Table: | 32K |
| Appearance Size: | 442mm × 285mm × 44mm | Power: | 80W |
| High Light: | fiber optic ethernet switch,fiber optic gigabit switch |
||
Model: LNK-FS48G6C4X Series
Overview
LNK-FS48G6C4X Series 48-Port SFP Fiber Switch are standard layer 3 non-blocking switch with 48-Port Gigabit SFP, 6-Port Combo Ethernet and 4-Port extensible 10G SFP+, based on high-performance ASIC chip technology, the modular structure design , which have a capability of multilayer switching and wire-speed routing forwarding. Can be deployed in the metropolitan area network, and provides a few last 1 km technology to gather and core data exchange.
At the same time, FS48G6C4X Series Switches provide a complete IPv4/IPv6 routing, including tunnel and IP multicast.
The user can set all kinds of functions of switch through the Web, SNMP and so on. FS48G6C4X Series Switches support DOS defense, Qos, RSTP, MSTP, VLAN, Port Security, a storm suppression, ACL access control and other functions, which is very suitable for the aggregation application of large-scale network and the core application of medium and small-sized network.
Technical Indexes
| Product Type | L3 Managed 48G SFP+6GE Combo+4x10G SFP Fiber Switch |
| Fixed port | 48-Port Gigabit SFP Fiber Port + 6-Port Combo TP + 4-Port SFP+ |
| Backplane bandwidth | 176Gbps |
| Packet forwarding rate | 130.94Mpps |
| Processor | RISC 600MHz |
| Flash memory capacity | 8MB |
| The memory capacity | 128MB |
| Address table | 32K |
| Product characteristics | |
| Spanning tree |
Support STP, RSTP, MSTP Support PVST/PVST+ |
| VLAN | Support port-based VLAN |
| Support MAC based VLAN | |
| Support 802.1Q tag VLAN | |
| Support Super VLAN | |
| Support for Private VLAN | |
| Support GVRP Dynamic VLAN Configuration | |
| Support QinQ and Smart QinQ | |
| Support Voice VLAN | |
| Flow control | Based on a standard IEEE 802.3x flow control |
| Using IEEE 802.1Qbb priority flow control | |
| Support CAR Function | |
| Broadcast control | Restraining broadcast storm, stop sending so long as reaching a critical point |
| Multicast control | IGMP Snooping multicast message automatic monitoring |
| Port binding | Each group of a maximum of 8, while support 32 group LACP dynamic or static polymerization |
| Port mirroring | Support based on flow classification mirroring and port mirroring |
| Stacked |
Stacked 16 hard, soft stacking 32 Using clustering techniques, with a unified centralized management of IP address to do address resource saving |
| Routing management | Static routing RIP v1/v2, OSPFv2, BEIGRP (compatible with Cisco EIGRP), BGPv4, ISIS, BGP Anti virus intelligent routing function |
| Strategy routing | Support based on IP strategy routing |
| The proxy function | Support Proxy ARP, DNS Proxy |
| Redundancy backup | Support for VRRP, HSRP Hot Standby Router Protocol |
| Characteristics of DHCP | DHCP Server, DHCP Client and support DHCP relay |
| Function of NAT | Support the static or dynamic NAT address translation function |
| Safety characteristics |
Port Security (Port Security) function Hardware support for IP ACL, MAC ACL, Vlan ACL User classification management and password protection |
| Quality of service | IEEE 802.1Qau congestion mechanism Each port 8 send queue mapping 802.1p 8 priority DRR, WRR, SP and FIFO queue scheduling algorithm Best-Effort Service Differentiated Service Strict Priority Weighted Round Robin First come first served TOS to mark RTS |
| Network management | SNMP v1/v2/v3 RMON (1,2,3,9 group) Telnet WEB interface Support for cluster management Support SSH Support for PDP (compatible with Cisco CDP.) To support the fan, temperature, system log, hierarchical alarm |
| Physical characteristics | |
| Appearance size | 442mm × 285mm × 44mm |
| Power characteristic | AC 110-240V adaptive, 47-63Hz, 1A/230V, RPS power hot backup |
| Power | 80W |
| Indicator lamp | Power indicator, indication of system, connecting / transceiver instructions |
| Environment |
Operating Temperature: 0-50 ℃ Relative Humidity: 0-90% no condensation |
| Model | Description |
| LNK-FS48G6C4X | L3 Managed 48-Port Gigabit SFP + 6-Port Combo Ethernet + 4-Port 10G SFP+ Fiber Switch |
Contact Person: Mr. Michael Guo
Tel: 19928768315
Fax: 86-755-8312-8674
E-Link Gigabit Power Over Ethernet Injector 12~48VDC Power Input DIN Rail / Wall Mount
Single Port 60W Power Over Ethernet Devices Support Din Rail / Wall Mount Installation
10/100/1000Mbps High Power Poe Injector 95 Watt 802.3bt 100m Transmission
48 Volt 2 Port Cisco POE Power Over Ethernet Injector 10 / 100 / 1000Mbps 15.4W
Mini 4K HDMI Optical Extender Uncompressed Multimode USB Input 300M
4K SFP LC 80km HDMI Fiber Extender 10.3Gbps Single Mode Fiber Extender
SFP 5VDC HDMI Over Fiber Optic Extender Micro 4K USB Port 80Km
4K*2K HDCP 10.3Gbps HDMI Fiber Extender SFP LC With External Audio
Mini 3G/HD-SDI to Fiber Converter Extender with Tally function or RS485 Data
3G-SDI SDI To Fiber Optic Converter Video Extender over Fiber 20KM Long Transmission
HD SDI To Fiber Optic Converter with Forward Audio
Ethernet over Fiber Converter SD/HD/3G-SDI + RS485/RS422/RS232 Data + 10/100M
| Sitemap
